.
Discount Hydro has the lowest prices and best service on Hydroponic Gardens. Helping to Create a Ripe Harvest Every Year
Drip Irrigation
No-Clog Drip Stakes

No-Clog Drip Stakes   5

These No Clog Drip Stakes are for use with hydroponic drip-watering systems. These Drip Stakes are designed with a protective basket to prevent buildup and clogs. They are 4" tall and stick perfectly into rockwool cubes or grow rocks for intermittent or constant watering. They are not pressure compensating, so they will not clog. They fit on 1/4" tubing. They are sold in bags of 10 or 50.
From $0.35 Click for more information
Fill-Drain & Overflow Fittings

Fill-Drain & Overflow Fittings   5

Fill/Drain & Overflow fittings are mostly used for ebb & flow and drip systems. In an ebb & flow system, you pump the water from your reservoir up to your flood table. When the water level gets to the level of the overflow fitting, it spill back into the reservoir from the overflow fitting.
From $1.50 Click for more information
Fill-Drain & Overflow Fittings

Fill-Drain & Overflow Fittings

American Hydroponics The American Hydroponics Fill/Drain and Overflow fittings have been around a long time. The Fill & Drain fitting accepts 1/2" tubing and features a rubber gasket for a watertight fit. The overflow fitting features an adjustable height and a rubber gasket for a watertight seal and connects to standard 3/4" PVC pipe.
From $4.95 Click for more information
1/2'' Poly Tubing

1/2'' Poly Tubing

When making a Drip System, poly tubing is used as the main drip line. You punch holes into it using a hole punch, and then insert 1/4 connectors to attach to 1/4" vinyl tubing which is attached to your drippers or drip stakes.
From $0.30 Click for more information
1/4'' Vinyl Tubing

1/4'' Vinyl Tubing

1/4 vinyl tubing is used to go from 1/2'' Poly line to the drippers or drip stakes that will water your plants. It is available in coils of 50' and 100'. It is attached to the 1/2'' Poly line with 1/4'' Connectors for a leakproof fit.
From $4.95 Click for more information
1/4'' Barbed Fittings

1/4'' Barbed Fittings

A barbed end connector is used for attaching 1/4'' vinyl to 1/2'' poly tubing or for joining two pieces of micro-tubing together. Use Elbows where right angles are needed to get in and out of containers. You can use these as the end of the line to drip into plants directly when attached to a Tubing Support Stake.
From $0.25 Click for more information
1/2' Barbed Fittings

1/2' Barbed Fittings

A barbed end connector is used for attaching 2 lengths of 1/2'' tubing together. Use Elbows where right angles are needed to get around corners. Tee's are used for branching of tubing.
From $0.50 Click for more information
3/4' Barbed Fittings

3/4' Barbed Fittings

A barbed end connector is used for attaching 2 lengths of 3/4 tubing together. Use Elbows where right angles are needed to get around corners. Tee's are used for branching of tubing.
From $0.75 Click for more information
1/2'' & 3/4'' Quick Clamps

1/2'' & 3/4'' Quick Clamps

Use Click Clamps to prevent tubing from coming off of barbed fittings and pumps. They are available in 1/2'' and 3/4''.
From $0.50 Click for more information
1/2'' & 3/4'' Valves

1/2'' & 3/4'' Valves

Use Shut-Off Valves in-line with your water flow. A quick twist on the top of the valve to turn on and off. Can also be used to regulate water flow. They are available in 1/2'' and 3/4''
From $2.95 Click for more information
1/2

1/2" Grommet

Our 1/2'' Grommets are made to fit 1/2'' Barbed fittings. They will form a waterpoof seal. They can be used to replace old, warn grommets in your hydroponic systems and are essential components when making your own hydroponic system. They are sold individually and in bags of 25.
From $0.70 Click for more information
Micro Spray Jet

Micro Spray Jet   5

Our Micro Spray Jets are great for building your own aeroponic or cloning systems. These jets deliver a 360 degree water spray using just pump pressure. They can be screwed into PVC piping or Poly tubling.
From $1.00 Click for more information
Hydroponic Spinner

Hydroponic Spinner   0

Our Aeroponic Spinner/Sprinklers are great for building your own aeroponic or cloning systems. These jets deliver a 360 degree water spray using just pump pressure. They can be screwed into PVC piping or Poly tubling.
From $1.00 Click for more information
1/4'' Tubing Support Stake

1/4'' Tubing Support Stake

4 Support Stakes Plastic stakes hold 1/4'' tubing in place next to plants. Works great into rockwool or soil.
From $0.25 Click for more information
Hole Punches

Hole Punches

Designed for comfortable use. Punches holes in 1/2'' Poly Tubing to insert 1/4'' connectors or drippers. Two punches are available, a manual punch and a professional punch. If you are punching many holes, you will want to consider the professional punch, as it makes punching holes in Poly Tubing quick and easy.
From $2.95 Click for more information
Poly End Plug

Poly End Plug   2.5

These End Plugs are used at the end of your 1/2'' Poly Tubing to close it off to create pressure for your drippers, etc.. The cap is removeable and has a 3/4'' hose fitting on the end to connect to a hose for easy drip line flushing and cleaning.
From $1.95 Click for more information
Pressure Compensating Drippers

Pressure Compensating Drippers

Drippers are used at the end of 1/4'' vinyl tubing to control the flow of the water or nutrient solution to each individual plant site. They flow 2 gallons per hour. They maintain the same flow rates at different water pressures.
From $0.75 Click for more information
Inline Pressure Compensating Drippers

Inline Pressure Compensating Drippers

Inline Drippers are used when you need to drip water off of a 1/4'' vinyl tube, but not at the end of the tube. They are placed in-line with each other so that you do not need a separate 1/4'' vinyl tube for each plant. You should use a standard dripper at the end of the line. They are available in 1 gallon per hour.
From $0.75 Click for more information
Hole Plugs for Poly Tubing

Hole Plugs for Poly Tubing

Hole Plugs are used when you need to plug holes in your 1/2'' Poly Tubing. They snap into the tubing, preventing water from coming out of the punched hole. If you remove 1/4'' drippers or 1/4'' connectors, these will completely seal the hole.
From $1.95 Click for more information
Inline Water Filter

Inline Water Filter

These filters are made to filter out sediment and non-soluble particles from your nutrients. This is especially useful when using organic nutrients. This will help prevent clogged drippers and lines. It has a replaceable filter element and 3/4'' threads.
$19.95 Click for more information
1/2' and 3/4' Tubing

1/2' and 3/4' Tubing   5

1/2'' Tubing is the standard tubing used to connect to pumps, 1/2'' connectors, etc. it is flexible and does not kink easily. The 3/4'' Tubing is used to connect to 3/4'' pump outlets and fittings. Available in a variety of colors.
From $0.50 Click for more information

 

Need advice before
you purchase?

Call us toll free:

1-877-476-9487

Monday - Friday
9 am - 5 pm PST
Saturday
11 am - 4 pm

Or E-mail our



Lighting Advisor
Lighting Advisor

Get Your Free Catalog
Get Your Free Catalog